• S earch for other spots if there are less than two studs, or the distance between the studs are different from the
plate hanger.
• Fix the installation plate without inclining to one side.
• M ake sure that a wall can withstand the weight of the product. If you install the product in a place where it is not
strong enough to withstand the product weight, the unit could fall and cause injury.
assembling the hanger screw
Use 2 screws to fix the indoor unit with hanger plate as shown
in the picture.
Disassembling/assembling the Cover panel for indoor unit installation
In order to install the indoor unit, you must disassemble the cover panel first . Please proceed following
instructions to disassemble and assemble the cover panel . Hooks (on the cover panel) may get damaged if you
apply excessive force as you disassemble and assemble the cover panel . Please follow the following instructions .
removing the screws
Cover panel is assembled on the bottom part of the indoor unit (as shown in the illustration) and it is fastened
with screws . Remove the Cap screw first and unfasten the screws so that you can disassemble the cover panel .
A3050 Australia_IB&IM_DB68-05206A_EN.indd 43
Please scan
this QR code for detail
video of indoor unit
installation .
Cap Screw
English-43
<Remove the Cap screw>
Cover Panel
<Unfasten the screw>
Screw
2014/12/29 19:07:36