Step 3: Waterproof The Cable Connections - LevelOne FCS-4042 Hardware User Manual

Step 3: Waterproof the Cable Connections

The camera itself is waterproof, however take note that the cable connections are not.
If the camera is mounted directly on the ceiling/wall where the cables pass through the
ceiling/wall, then your installation is complete and you do not need to waterproof the cable
connections.
However, if the camera is mounted where the cables may be exposed then it is recommended to
waterproof the cable connections or use a junction box.
The camera comes with a Cable Gland and Conduit Gland. It is recommended to use one of
these glands when a high PoE injector will be used with the camera. However, if the bundled
power adapter will be used or digital input/output devices will be connected (see
Connect Digital Input / Digital Output Devices
cables inside the junction box (see
Cable Gland
For use with an exterior-grade Ethernet cable
(not included in the package).
See How to Waterproof the Cable Using
the Cable Gland on page 17.
Hardware Manual
on page 29), it is recommended to house the
How to Use the Junction Box
For use with 1/2" flexible conduit (not
included in the package).
See How to Waterproof the Cable Using
the Conduit Gland
16
How to
on page 25).
Conduit Gland
on page 21.