LevelOne FCS-4042 Hardware User Manual page 41

Hardware Manual
If you work with our cameras regularly, then there is even a better way to discover the
cameras in the network – by using IP Utility. The IP Utility is a light software tool that can not
only discover the cameras, but also list lots of valuable information, such as IP and MAC
addresses, serial numbers, firmware versions, etc, and allows quick configuration of multiple
devices at the same time.
The IP Utility can be downloaded for free from our website.
When you launch IP Utility, the list of connected cameras in the network will be shown. See
sample illustration below:
The camera model name is shown on the list. Click on the IP address to automatically launch the
default browser of the PC with the IP address of the target camera already filled in the address
bar of the browser.
41