How To Replace The Dome Cover - LevelOne FCS-4042 Hardware User Manual

Ptz dome network camera

Table of Contents

Hardware Manual

How to Replace the Dome Cover

The original dome cover that comes with the camera is Vandal Resistant (IK09). The dome cover

can be replaced with a transparent or smoke Vandal Proof (IK10) dome cover available for

purchase.

To replace the dome cover, do the following:

1. Loosen the four (4) screws using the hex screwdriver included in the camera package.

2. Carefully lift the cover. Using a screwdriver, remove the screw to detach the cover from the

camera.

3. Prepare the replacement dome cover. Below is an example of the smoke vandal proof cover.

Table of Contents