Ford 2013 Flex Owner's Manual page 421

If you select:
Add Bluetooth
1
Device
Connect Bluetooth
Device
Set As Primary
Phone?
2013 Flex (471)
Owners Guide gf, 1st Printing
USA (fus)
SYNC
You can:
Pair additional phones to the system.
1. Press OK to select, then again when Find
SYNC appears in the display.
2. Follow the directions in your phone's user
guide to put your phone into discovery mode. A
six-digit PIN appears in the display.
3. When prompted on your phone's display, enter
the six-digit PIN provided by SYNC.
4. When Set As Primary Phone? appears, press
OK. Scroll to toggle between Yes and No, then
press OK.
5. Depending on the functionality of your phone,
you may be asked additional questions (i.e. if you
would like to download your phonebook). Scroll
and use OK to select your responses.
Connect a previously paired Bluetooth-enabled
phone.
1. Press OK to select and view a list of
previously paired phones.
2. Scroll until the desired device is chosen,
then press OK to connect the phone.
Note: Only one device can be connected at a
time. When another phone is connected, the
previous one is disconnected.
Set a previously paired phone as your primary
phone.
Press OK to select and scroll to select the
desired phone. Press OK to confirm
Note: SYNC attempts to connect with the
primary phone at every ignition cycle. When a
phone is selected as primary, it appears first in
the list and is marked with an *.
I n f o r ma t i o n P r o v i d e d b y :
421