Table of Contents
Advertisement
Quick Links
VACUUM CLEANER
STOCK No.59333
PART No.VC300
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE
THE SAFE AND EFFECTIVE USE OF THIS TOOL.
01/2000
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the
machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct
and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to the
machine, and prior to any maintenance tasks. By following all the general safety instructions contained in this manual, it will ensure both
machine and operator safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of continuous
improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper VC300
Summary of Contents for Draper VC300
-
Page 1: Vacuum Cleaner
01/2000 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to the... -
Page 2: Table Of Contents
Know your vacuum ...................6 Operating instructions..................7 Maintenance.....................8 Optional accessories ..................9 DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Part Number:- VC300 Stock Number:- 59333 Description:- Vacuum Cleaner. -
Page 3: Specification
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the 12 month period. -
Page 4: Power Supply
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted. -
Page 5: General Safety Instructions
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 6: Know Your Vacuum
GETTING TO KNOW YOUR ✕✌ ✗✌ ✖✌ ✚✌ ✘✌ ✙✌ ✛✌ On/off switch 6. Drive belt cover Power lead 7. Brush housing Hand grip Release button for dust container Dust container with filter -6 -... -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS THE VC300 IS ASSEMBLED AND READY FOR Fig.1 TO OPERATE ✫✌ Connect the vacuum to the power supply. Hold ✪✌ the handle firmly, with your thumb slide the ✫✌ switch forward to turn the vacuum on, and back to turn off. -
Page 8: Maintenance
MAINTENANCE REPLACING THE DRIVE BELT Fig.3 IMPORTANT ✰✌ Disconnect the vacuum from the power supply before replacing any parts. 1. Remove screw ✯✌ to release front cover ✰✌. FIG.3. ✯✌ 2 Remove the two screws ✱✌ holding the brush housing ✳✌ in place and remove. FIG.4. Fig.4 ✳✌... -
Page 9: Optional Accessories
OPTIONAL ACCESSORIES ACCESSORY KIT FOR VC300 PART No.AVC15 STOCK No.59334 - 9 -... - Page 10 NOTES -10 -...
- Page 11 NOTES -11 -...
-
Page 12: So53 1Yf. England
©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the VC300 and is the answer not in the manual?
Questions and answers