Advertisement
CLOSED CAPTIONS
The default setting for Closed Captioning is OFF. To access Closed Captioning, press MENU
highlight Closed Captioning and press OK/ENTER
On or Off.
AUDIO LANGUAGE
The default setting for Audio Language is "English". To change the language setting, press MENU
to highlight Audio Language and press OK/ENTER
OK/ENTER
.
OK
ENTER
Note: Not all programming is available in an alternate language. If the audio is changed from English, and alternate audio is not available,
there may be no audio present.
HDMI
(APPLIES ONLY TO HDTVs CONNECTED VIA HDMI CABLE)
The default setting for HDMI resolution is "Auto". The device will automatically configure the best HDMI resolution to be compatible
with the TV. To adjust the HDMI resolution, press MENU
OK/ENTER
. Choose the preferred resolution and press OK/ENTER
OK
ENTER
If the property subscribes to Standard Definition service, all channels should be in full-screen format. HD channels will come
in a letterbox format (black bars on top and bottom). If this is not correct on the TV, modify the Aspect Ratio setting to 4:3 and
check again.
If a resident has an HDTV but the property subscribes to the Standard Definition package, most HD channels should be in a
letter box format (black bars on the top and bottom), but SD channels will remain in full-screen format. To modify these settings,
check the TV settings for stretched, zoom, or crop options.
If the property has HDTVs and subscribes to the HD package, all SD channels will be in a pillar-box format (black bars on the
left and right). All HD channels should be full screen in a 16:9 format. If not, modify the Aspect Ratio setting to 16:9.
Note: All Aspect Ratio modifications take 10 seconds before change is completed.
OUTPUT RESOLUTION
Default setting for Screen Format is "Auto". To select another format, press MENU
HDM1 Setup and press OK/ENTER
options.
CHANNEL LOCKS
Default for Channel Locks is "Off". Charter does not recommend changing this setting.
Important Note: If a tenant sets a Channel Lock PIN through the Menu, a call to Charter will be required in order to reset it. Should this
occur in one or more units at your property, please have an authorized staff member call Charter at 1-800-314-7195 and request a
"PIN reset". The Charter representative will need the unit number where the impacted device is located. After the reset, if you are prompted
to enter a PIN, please use "0000" and turn Channel Locks "Off". There is no need to set a new PIN.
Thank you for choosing Charter Communications
. Use the Directional
OK
ENTER
. Use the Directional
OK
ENTER
(HDTVs ONLY)
. If you do not have an HDTV, this will always default to "Auto" and will not provide additional
OK
ENTER
buttons or follow the on-screen navigation to turn
buttons, choose the desired language and press
. Use the Up/Down
buttons to highlight HDMI and press
CH
.
OK
ENTER
. Use the Down
. Use the Down
. Use the Down
button to highlight
button to
button
6
Hide quick links:
Advertisement
