Exterior Lighting - SMART FORTWO Owner's Manual

draining away. This can lead to corro-
sion damage and damage to electronic
components.
X
Clean the inside and outside of the win-
dows with a damp cloth and a cleaning
agent that is recommended and approved
by smart.
Cleaning the wiper blades
G
WARNING
If the windscreen wipers are set in motion
when cleaning the windscreen or wiper
blades, you could become trapped. There is
a danger of injury.
Always switch off the windscreen wipers
and the ignition before cleaning the wind-
screen or wiper blades.
! Do not pull on the wiper blade. Other-
wise, the wiper blade could be damaged.
! Do not clean wiper blades too often and
do not rub them too hard. Otherwise, the
graphite coating could be damaged. This
could cause wiper noise.
X
Fold the wiper arms away from the wind-
screen.
X
Carefully clean the wiper blades with a
damp cloth.
X
Fold the windscreen wipers back again
before switching on the ignition.
! Hold the wiper arm securely when fold-
ing back. The windscreen could be dam-
aged if the wiper arm hits against it
suddenly.
Cleaning the exterior lighting
! Only use cleaning agents or cleaning
cloths that are suitable for plastic len-
ses. Unsuitable cleaning agents or
cleaning cloths could scratch or damage
the plastic lenses of the exterior light-
ing.
X
Clean the plastic lenses of the exterior
lighting using a wet sponge and a mild
cleaning agent, e.g. smart car shampoo or
cleaning cloths.
Cleaning the sensors
! If you clean the sensors with a high-
pressure cleaner, make sure that you keep
a distance of at least 30 cm between the
vehicle and the high-pressure cleaner
nozzle. Information about the correct
distance is available from the equip-
ment manufacturer.
X
Clean sensors : of the driving systems
with water, car shampoo and a soft cloth.
Cleaning the reversing camera
! Do not clean the camera lens and the
area around the reversing camera with a
high-pressure cleaner.
Care
215
Z