Monochrome Display - SMART FORTWO Owner's Manual

Hide thumbs Also See for FORTWO:
Table of Contents

Advertisement

Display messages (on-board computer with monochrome display)
162
Display messages (on-board computer with monochrome display)
Introduction
Warnings, malfunctions or additional information are shown in the monochrome display
as symbols. For certain display messages a warning tone also sounds.
Display messages with graphic symbols are simplified in the Owner's Manual and may
differ from the symbols in the display.
Please respond in accordance with the display messages and follow the additional notes
in this Owner's Manual. The cause of a display message should be remedied as soon as
possible.
Display messages
Display messages
b
A
Possible causes/consequences and M Solutions
The symbol lights up.
The brake lights are not functioning. The actuation or the
bulbs or LEDs are faulty.
G
WARNING
Bulbs and lamps are an important aspect of vehicle safety. The
brake lamps are not functioning and are no longer working when
braking.
There is a risk of an accident.
X
Pull over and stop the vehicle safely as soon as possible,
paying attention to road and traffic conditions.
X
Secure the vehicle against rolling away (
X
Consult a qualified specialist workshop.
Vehicles with manual transmission only: letter N flashes in the
middle of the display.
You are trying to start the engine, a gear is engaged and the
clutch pedal is not fully depressed.
To start the engine:
X
Y
Engage neutral. (
or
X
Depress the clutch pedal fully.
If the engine fails to start despite the clutch pedal being fully
depressed, then the clutch sensor is malfunctioning.
X
Visit a qualified specialist workshop.
page 121)
Y
page 132).

Advertisement

Table of Contents
loading

Table of Contents