Advertisement
Before You Start
The ProPack Portable Spray Pack is shipped with a bat-
tery inside the air compressor which must be connected
before operation.
1. Remove contents from backpack including any
packing materials.
2. Remove air compressor from reservoir lid.
3. Open battery door on flat side of air compressor.
ti17593a
4. Remove 9V alkaline battery and remove shipping
seal from battery terminals.
5. Pull battery connector out of air compressor.
ti17591a
2
ti16510a
ti17825a
6. Connect battery and place inside air compressor.
7. Replace battery door.
ti17595a
8. Turn on power switch to test battery (red LED light
should turn on).
Before You Start
ti17824a
ti17596a
3A2852B
Advertisement
