Modes Of Operation - Dimplex QRAD050 Operating Instructions Manual

Modes of Operation

The heater comes pre-programmed with a set of heating profiles. There are
four options available - three preset and one user adjustable timer;
1. Out All Day (pre-programmed) - has the following preset
times Monday to Sunday, which can be altered if desired;
07.00 until 08.30
17.30 until 22.00
2. Home All Day (pre-programmed) - has the following preset
times Monday to Sunday, which can be altered if desired;
08.00 until 21.00
3. Holiday (pre-programmed for 7 days at 10°C) - set the number of days
required (from 1 to 300) and the temperature required. 7°C is advised if
you just want to protect the property from frost while you are away.
4. User Timer - provides greatest flexibility to the user. Four time slots are
available throughout the day and these can be customised for each day
of the week.
NOTE: Once modified a programme must be selected if you want
to begin using it.
The heater can also maintain a constant room temperature using the
following modes;
1. Manual mode heats the room to a comfortable temperature
of 21°C.
2. Eco mode maintains a room temperature of 18°C. By reducing the
room temperature slightly, significant energy savings can be achieved.
The green display colour indicates that selected temperature provides
a comfortable room temperature while reducing energy consumption.
3. Frost Protect mode maintains a room temperature of 7°C.
This mode should be used to provide protection against frost
as indicated by the blue display.
NOTE: It is recommended that the timer is used as doing so can
reduce the running cost. Operating the appliance in the permanent
heating modes may result in increased running costs.
Select Off to switch off the appliance. This mode should be used when
heating is not required for extended periods. Press any of the buttons to
activate the display and then select the required mode of operation.
NOTE: In all modes,
room temperature. In timer modes, this change is temporary and
the heater will revert the saved heating profiles at the end of the
Comfort On period.
and can be used to adjust the required
13