Dmx Address; Channel Mode; Slave Mode - ADJ Event Bar Q4 User Instructions

Event Bar Q4 System Menu Event Bar Q4 System Menu
Menu Lock: The system menu will lock after 30 seconds of
inactivity. You will need to press the MENU button for at least
30 second to unlock and access the menu.

DMX Address

- Set the DMX Address -
1. Press the MENU button until "DMX Addresss" is displayed,
press ENTER.
2. "X" will now be displayed, "X" represents the displayed
address. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm, and then press and hold the MENU
button to assign.
for at least three seconds

Channel Mode

- This will let you select your desired
DMX Channel mode.
1. Press the MENU button until "Channel Mode" is displayed,
press ENTER.
2. "X Chan" will now be displayed, "X" represents the displayed
DMX channel mode. Press the UP or DOWN buttons to find your
desired Channel mode.
3. Press ENTER to confirm.

Slave Mode

- This will let you set your unit as a master
or slave in a master/slave configuration.
1. Press the MENU button until "Slave Mode" is displayed,
press ENTER. Either "Master", "Slave 1" or "Slave 2" will be
displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, and press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture
ADJ Produc s, LLC - www.adj.com - Event Bar Q4 Instruction Manual Page 8
ADJ Produc s, LLC - www.adj.com - Event Bar Q4 Instruction Manual Page 9
t
t