Winegard SENSAR VM-1000 User Manual

90 DAY LIMITED WARRANTY

Winegard Company warrants this Winegard product against any defects in materials or workmanship within 90
(ninety) days from date of purchase. No warranty claim will be honored unless at the time the claim is made, you
present proof of purchase to an authorized Winegard dealer (if unknown, please contact Winegard Company, 3000
Kirkwood Street, Burlington, IA 52601-2000, Telephone 319-754-0600).
Winegard Company (at its option) will either repair or replace the defective product at no charge to you. This
warranty covers parts, but does not cover any costs incurred in removal, shipping or reinstallation of the product.
This limited warranty does not apply if the product is damaged, deteriorates, malfunctions or fails from: misuse,
improper installation, abuse, neglect, accident, tampering, modification of the product as originally manufactured
by Winegard, usage not in accordance with product instructions or acts of nature such as damage caused by wind,
lightning, ice or corrosive environments such as salt spray and acid rain.
The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all handling and
freight charges prepaid to your Winegard dealer for return to our factory for repair or replacement. Winegard dealers
will arrange for the replacement or repair and return to you without charge the product which failed due to defective
material or workmanship.
WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS
OR IMPLIED, MADE BY ANY OTHER PERSON.
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF
FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIMITED TO THE 90-DAY PERIOD OF
THIS WARRANTY.
The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or otherwise, and
Winegard shall not be liable for incidental or consequential damage or commercial loss, or from any other loss or
damage except as set forth above.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
HOW TO PROVIDE LIGHTNING
PROTECTION FOR TV ANTENNA
AND SET
STEP 1. Mount the lightning arrestor as
close as possible to where the downlead
enters the house.
STEP 2. The ground wires for both the mast
and the downlead should be copper or
aluminum wire, number eight (8) or larger.
STEP 3. The downlead wire from the
antenna to the lightning arrestor should be
secured every four (4) to six (6) feet to
prevent whipping.
NOTE: In the case of a "ground up" antenna
Installation, it may not be necessary to
ground the mast if the mast extends four or
more feet into the ground. Consult a TV
serviceman for proper depth in your location.
Printed in U.S.A. © 2001 Winegard Company 2451828 Rev. 2/04
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
Antenna Lead
Ground In Wire
Clamp
Grounding Wire Conductors
(NEC Section 810-21)
Electric
Service
Equipment
Antenna
Discharge Unit
(NEC Section 810-20)
Rain Drip Loop On
Lead-In To TV
Ground
Clamps
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
NEC - National Electrical Code
WINEGARD
SENSAR
®
Amplified Model GS2000A
Non-amplified Models GS-1000, GS-1002, VM-1000
Made in U.S.A.
Patent No. 5,262,793
WARNING: TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT
EXPOSE POWER SUPPLY TO
RAIN OR MOISTURE.
NOTE: Any alteration or modification to product or any other use
of the parts other than their intended use, voids the warranty.
WINEGARD CO., 3000 KIRKWOOD STREET, BURLINGTON, IA 52601-2000
®
TV ANTENNA
WARNING: INSTALLATION OF
ANTENNAS NEAR POWER
LINES IS DANGEROUS.
YOUR SAFETY, FOLLOW THE
INSTALLATION INSTRUCTIONS.
FOR