Table of Contents
Advertisement
10.0 OPERATING GUIDE
Power ON / OFF:
•
Connect the LCD TV to power outlet and turn on the power switch. The power switch –
On/Off (20) is located under front edge of panel. The power indicator will be red and then
turns to blue. The "TRANSONIC " logo will appear on the screen. TV picture will display
on the screen.
•
Press the Standby Button on the front panel or on the remote control to turn the LCD TV
on Standby mode.
•
Unplug completely from the power outlet when the LCD TV unused for long periods of
time.
10.1 SIGNAL SOURCE SELECTION
Using the remote to select signal source:
Press the "Video" button to select input source e.g. TV, AV1, AV2
• • • •
Press the "S-video" button to select S-Video input
• • • •
Press the "PC" button to select PC (VGA) input
• • • •
Press the "YPbPr" button to select HDTV input
• • • •
These settings can also be set on the main television.
Press the "Source Select" button on the front panel to select input source
• • • •
TV – S-Video – HDTV – AV2 - VGA – DVI – AV1
10.2 CHANNEL SELECTION (TV MODE)
When in TV mode you can change the channel by pressing either CH+ or
CH- on the remote control.
You can also change the channel by using the identical buttons located on
the bottom of the front panel.
To go directly to a specific channel you can enter the number using the
numerical pad on the remote.
For example to select channel 120, on the remote simply press number 1
followed by number 2 followed by number 0.
15
Advertisement
Table of Contents
