9.0 DVD CONNECTION SETUP
For alternative set ups please see details below. The first example is for a DVD player.
Some references to input & output sockets may vary to those on your associated equipment.
Do not connect to the mains supply until all the connections have been made correctly.
9.1 DVD QUICK SETUP GUIDE
Step 1.
DVD CONNECTION SETUP
Audio Input:
• • • •
Use the Audio RCA input L & R (19) on the rear and side of LCD display to connect the DVD
player Audio output RCA plugs L (white) & R (red)
Video Input:
• • • •
Use the SCART-to-RCA adaptor connect to SCART1 or SCART2 socket on the rear of LCD
Display, then connect the DVD player Video RCA output plug (yellow)
If the DVD player has a set Y/Pb/Pr/Y/Cb/Cr Video RCA output, use Video
Y/Pb/Pr/Y/Cb/Cr RCA input (green / blue / red) (18) on the rear of LCD to connect the
DVD player Video Y/Pb/Pr/Y/Cb/Cr RCA output plugs (green / blue / red).
NOTE:
13