Table of Contents
Advertisement
Step 2.
DVD SIGNAL SOURCE SELECTION
To select the desired DVD signal source by remote control.
Press the "Video" button until to enter AV1 or AV2 mode
• • • •
If the Y/Pb/Pr/Y/Cb/Cr connections are set up then you can press the "YpbPr" button to select HDTV
mode instead of AV mode. This will give you better viewing quality than AV mode.
9.2 SCART CONNECTION
Ideal for quick connection of TV, DVD, Video & other equipment.
SCART 1 (AV1) option with composite video input/output, stereo audio input/output connection
• • • •
SCART 2 (AV2) option with composite video input/output, stereo audio input/output connection
• • • •
For other connection options (PC & DVI) refer to specific installation guides supplied with
auxiliary equipment.
DVD CONNECTION SETUP
NOTE:
14
Advertisement
Table of Contents
