3.
Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.21. Specifying the ScreenBeam CMS for the Receiver
Follow the procedure below to specify a management server for the receiver:
Go to the Remote Management tab page by clicking the Remote Management tab.
1.
2.
Go to the Central Management System Setting section, and define the CMS Host and
the CMS Port.
CMS Host: It is the IP address or the FQDN/hostname/domain name/alias name (if you
have properly configured the DNS server and the DHCP server) of the server that hosts
the ScreenBeam CMS. It supports a domain with six labels at most.
Note: We recommend using the DNS setting.
CMS Port: It is the communication port of the ScreenBeam CMS.
3.
Click the Apply button, and then click OK on the pop-up message box to confirm.