Setting Up Hdcp Encryption - ActionTec SBWD100B User Manual

Always On: Selecting this option, the HDMI output is always on.
Screensaver: Selecting this option, the system will run the screensaver after the defined
idle time expires. Users can define the idle time (5-9999 seconds) in the Wait time box.
HDMI Off: Selecting this option, the HDMI/VGA output will be turned off after the defined
idle time expires. Users can define the idle time (5-9999 seconds) in the wait time box.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.

5.3.7. Setting up HDCP Encryption

Follow the procedure below to set up HDCP encryption:
1. Go to the Features tab page by clicking the Features tab.
2. Go to the HDCP Encryption line, and select an option from the HDCP Encryption box.
There are three options available: Enable, Disable, and Demo Mode.
Enable: This option is default. HDCP encryption is enabled to protect HDCP
protected media.
Disable: Disabling the HDCP Encryption function will improve connection speed
and compatibility. However, you can not play HDCP protected media.
Demo Mode: Reserved.