Table of Contents
Advertisement
Chapter 14 Static Route
14.2 The Static Route Screen
Use this screen to view the static route rules. Click Advanced > Static Route to
open the Static Route screen.
Figure 101 Advanced > Static Route
The following table describes the labels in this screen.
Table 69 Advanced > Static Route
LABEL
#
Active
Name
Destination
Gateway
Subnet Mask
Modify
238
DESCRIPTION
This is the number of an individual static route.
This field indicates whether the rule is active or not.
Clear the check box to disable the rule. Select the check box to enable it.
This is the name that describes or identifies this route.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
This parameter specifies the IP network subnet mask of the final
destination.
Click the Edit icon to go to the screen where you can set up a static route
on the P-660HN-F1A.
Click the Remove icon to remove a static route from the P-660HN-F1A. A
window displays asking you to confirm that you want to delete the route.
P-660HN-F1A User's Guide
Advertisement
Table of Contents
