FOR-A FA-95RU Operation Manual page 3

*1
Version
FPGA1:1.00 or higher
SOFT: 5.00 or higher
FPGA1:1.00 or higher
SOFT: 5.01 or higher
FPGA1:1.00 or higher
SOFT: 6.00 or higher
*1 Version information can be seen in the FA-95RU INFO menu (See section 6-1-2).
Refer to the Operation Manual of the connected FA-9500/FA-9520 for the software version
verification procedure.
Supported
Feature/Option
Added performance
features
-
FA-9520
FA-95ALA
SOFT: 5.00 or higher
Supports S2016/VI/WSS AFD,
CONV2 to Up/Down/Cross converter, and FA-95DE-E
option enhanced encoding function.
Compatible with FA-9500 software version:
FPGA1: 3.14 or higher
FPGA2: 5.02 or higher
FPGA3: 1.02 or higher
SOFT: 6.00 or higher
Corrected improper AUDIO DELAY displayed after CONV
DELAY ADJ is turned on.
Compatible with FA-9500 software version:
FPGA1: 3.14 or higher
FPGA2: 5.02 or higher
FPGA3: 1.02 or higher
SOFT: 6.00 or higher
Enabled control function for both FA-9520 and FA-9500.
Compatible with FA-9500 software versions:
FPGA1: 3.20 or higher
FPGA2: 5.20 or higher
FPGA3: 1.02 or higher
SOFT: 8.00 or higher
Compatible with FA-9520 software versions:
FPGA1: 1.10 or higher
FPGA2: 1.10 or higher
FPGA3: 1.00 or higher
SOFT: 2.00 or higher (in FA-9520 mode)
SOFT: 8.00 or higher (in FA-9500 mode)
3
Note