Fuser - HP LaserJet PRO M521 Repair Manua

Fuser

1.
Before proceeding, remove the following:
Rear cover assembly. See
●
Right-rear cover. See
●
2.
Release two tabs (callout 1) on the duplex paper-feed guide, and then slide the guide toward the
rear of the product to remove it.
Reinstallation tip
paper-feed guide.
Figure 1-116
80 Chapter 1 Removal and replacement
Rear cover assembly on page
Right-rear cover on page
Make sure that both tabs snap back into place when reinstalling the duplex
Remove the fuser (1 of 4)
1
24.
30.
ENWW