Table of Contents
Advertisement
8.
Remove two screws (callout 1), and then release one tab (callout 2). Let the sub fan and
environmental sensor hang from their wire harnesses.
Figure 1-199
9.
Remove two screws (callout 1), and then disconnect one connector (callout 2).
Figure 1-200
134
Chapter 1 Removal and replacement
Remove the HVPS (7 of 12)
1
Remove the HVPS (8 of 12)
2
2
1
ENWW
- Quick Links:
- Document Feeder Assemblies and Scanner
Hide quick links:
Advertisement
Table of Contents
