3.
Remove the USB PCA subassembly from the chassis.
Figure 1-83
4.
Place the USB PCA subassembly on a level surface. Remove two screws, and then remove the USB
PCA from the sheet metal bracket.
Figure 1-84
Control-panel FFC
1.
Before proceeding, remove the following:
Document feeder/scanner assembly. See
●
on page
Control-panel top cover. See
●
ENWW
Remove the USB PCA (3 of 4)
Remove the USB PCA (4 of 4)
46.
Control-panel top-cover on page
Document feeder assemblies and scanner
57.
Removal and replacement procedures
61