Tray 1 cover
1.
Before proceeding, remove the following:
Rear cover assembly. See
●
Left cover. See
●
2.
Carefully release two retaining arms (callout 1).
Figure 1-38
3.
Slightly lift the cover to a 45 degree angle, and then slide it toward the left side of the product.
TIP:
Figure 1-39
32
Chapter 1 Removal and replacement
Left cover on page
Remove Tray 1 cover (1 of 3)
1
If you lower the tray too far, it will not slide off of the hinge pins.
Remove Tray 1 cover (2 of 3)
Rear cover assembly on page
28.
24.
ENWW