Advertisement
A space is reserved for 3.5" floppy disk drives in the device bay.
Follow the procedures below to install a 3.5" floppy disk drive.
1. Fasten one pair of mounting brackets to both sides of a 3.5" floppy
disk drive. Note that the guide edges of the mounting brackets
should be on the lower side.
2. Open the front and rear cover plate of the device tray.
3. Insert the floppy disk drive with attached mounting brackets into
the device tray.
4. Fasten the mounting brackets to the device bay.
5. Connect the cables to the installed device and to the CompactPCI
rear transition board.
6. Close the front and rear cover.
Advertisement
