Advertisement
Before operating your system, first check your power supply source.
Adjust the switch on the power supply to the correct voltage.
Two mounting flanges are included for users who would like to install
the MIC-3031/14 on a 19" rack.
The device bay of the MIC-3031/14 accepts five devices, including
three 5.25"/3.5" devices and two 3.5" drives.
There are two types of mounting brackets shipped with the MIC-3031/
14. Three pairs of mounting brackets are designed for mounting 5.25"
devices such as hard disk drives or CD-ROM drives. Please refer to
Figure 2-4 for an illustration of mounting. However, if users would like
to use a 3.5" hard disk drive in the MIC-3031/14, extension brackets
(3.5" to 5.25") are required. These extension brackets are commonly
available in PC shops, or users can contact an Advantech distributor
to order them. One pair of floppy disk drive mounting brackets are
provided. Users can mount two floppy disk drives in the middle space
of the device bay or install one floppy disk drive with another 3.5"
drive. Please refer to Figure 2-5 for an illustration of mounting. Figure
2-6 shows the recommended device bay configuration.
Advertisement
