Enabling And Disabling Parksense; Service The Parksense® Rear Park Assist System - Dodge Durango 2015 Owner's Manual

234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled with the
ParkSense® switch.
When the ParkSense® switch is pushed to
disable the system, the instrument cluster will
display the "PARKSENSE OFF" message for
approximately five seconds. Refer to "Driver
Information Display (DID)" in "Understanding Your
Instrument Panel" for further information. When the
shift lever/gear selector is moved to REVERSE and the
system is disabled,
"PARKSENSE OFF" message for as long as the vehicle is
in REVERSE.
The ParkSense® switch LED will be ON when
ParkSense® is disabled or requires service. The
ParkSense® switch LED will be OFF when the system is
enabled. If the ParkSense® switch is pushed, and the
the DID will display
system requires service, the ParkSense® switch LED will
blink momentarily, and then the LED will be ON.
Service The ParkSense® Rear Park Assist
System
During vehicle start up, when the ParkSense® Rear Park
Assist System has detected a faulted condition, the
instrument cluster will actuate a single chime, once per
ignition cycle, and it will display the "PARKSENSE
UNAVAILABLE WIPE REAR SENSORS" or the
"PARKSENSE UNAVAILABLE SERVICE REQUIRED"
the
message. Refer to "Driver Information Display (DID)" for
further information. When the shift lever/gear selector is
moved to REVERSE and the system has detected a
faulted condition, the DID will display the PARKSENSE
UNAVAILABLE
PARKSENSE UNAVAILABLE SERVICE REQUIRED
message for as long as the vehicle is in REVERSE. Under
this condition, ParkSense® will not operate.
WIPE REAR SENSORS or