Shifting Procedure - Dodge Durango 2015 Owner's Manual

Hide thumbs Also See for Durango 2015:

Table of Contents

For additional information on the appropriate use of each

transfer case mode position, see the information below:

All-Wheel Drive Auto Range – This range sends power to

the rear wheels. The all-wheel drive system will be

automatically engaged when the vehicle senses a loss of

traction. Additional traction for varying road conditions.

All-Wheel Drive Low Range – This range provides low

speed all-wheel drive. Locks the front and rear drive-

shafts together forcing the front and rear wheels to rotate

at the same speed. Additional traction and maximum

pulling power for loose, slippery road surfaces only. Do

not exceed 25 mph (40 km/h).

Neutral – This range disengages both the front and rear

driveshafts from the powertrain. To be used for flat

towing behind another vehicle. Refer to "Recreational

Towing" in "Starting And Operating" for further infor-

Shifting Procedure

• If any of the requirements to select a new transfer case

position have not been met, the transfer case will not shift.

The position indicator light for the previous position will

remain ON and the newly selected position indicator light

will continue to flash until all the requirements for the

selected position have been met. To retry a shift: return

the control knob back to the original position, make

certain all shift requirements have been met, wait five

seconds and try the shift again.

STARTING AND OPERATING 441

Table of Contents