Benefon TRACK PRO 1.1 Owner's Manual page 95

2. (Key in the name or its initials and)
-
press
READ.
3. Scroll through the numbers with
needed.
4. When the correct number is displayed,
-
press .
SELECT
-
5. Finally press
SEND
If there is SMS transmission failure, the text
Error in sending will be displayed. In this
case, make sure the receiver´s phone num-
ber (including prefix) and message box
number are correct and also that there is
enough network coverage for radio com-
munication.
Send only
By selecting
Send only
ited message to someone without saving
the message into your SIM card.
For further information about sending
messages, please see the instructions in the
previous chapter Send and save.
n
, if
.
, you can send the ed-
Send with position
By selecting Send with position
send a message to the operator with a re-
quest for position information (in this case
the position information is based on the
GSM network parameters, not the GPS co-
ordinates). You can save the message with
your own messages as well.
For further information about sending
messages, please see the instructions in the
previous chapter Send and save.
Please note that this function is available
only if your operator supports the appro-
priate positioning services.
Postpone
By selecting Postpone
sage (as a draft) without sending it immedi-
ately to anyone. If you wish to finish or send
the message later, you can recall the post-
poned message through
menu.
MEMO: MESSAGES
, you can
you can save the mes-
Write messages
89