Table of Contents
Advertisement
return to previous menu level. The message
will not be sent either. In this case you may
delete some old messages to make some
free memory space or select the
option.
The default destination number for the
message is the number from where the orig-
inal message was sent. If the number in
question is stored in the phone book, the
name of the caller is displayed instead of
the number.
To send the message, press
If there is SMS transmission failure, the text
will be displayed. In this
Error in sending
case, make sure the receiver´s phone num-
ber (including prefix) and message box
number are correct and there is enough
network coverage for radio communica-
tion.
82
MEMO: MESSAGES
Send only
-
SEND.
FORWARDING THE MESSAGE
If you wish to send the message to someone else, you
are assumed to change the destination number.
1. To erase the whole default destination number
from the display, press
onds. When the display is empty, the right soft key
shows
.
SEARCH
-
2. Key in the new phone number. After the number
is keyed in, you can send the message by press-
ing the right soft key
-
RECALLING THE PHONE NUMBER FROM THE
PHONE BOOK
If you have stored the desired phone number in phone
book, you can also recall it from there.
1. Empty the display by pressing
seconds.
2. Press
.
(Key in the name or its the ini-
SEARCH
-
tials and) press
READ
-
bers with
if needed.
n
3. When the correct name or number is displayed,
press
. Press
SELECT
-
for a few sec-
CLEAR
.
.
SEND
for a few
CLEAR
.
. Scroll through the num-
.
SEND
-
Advertisement
Table of Contents
