Status Messages; About The Status Messages; Check List - Benefon TRACK PRO 1.1 Owner's Manual

STATUS MESSAGES

In order to send status messages, you need
to configure the phone to be a status
phone. The BeneGuard (SOS) button will
then have two different functions depend-
ing on how it is pressed:
•SOS function: When pressing and holding
the button down for a few seconds, an
emergency procedure will be started.
•Status message function: When pressing
the button quickly, a status message
menu will be displayed, and sending sta-
tus messages is possible.

ABOUT THE STATUS MESSAGES

Status message is a special short message,
which includes the status message number,
the name and the position information (i.e.
coordinates or some other protocol infor-
mation). If the current position information
is not available, the previous coordinates
will be sent instead.
If the security code request is turned on,
status messages can only be modified by an
authorized person, who knows the code.
The status messages are sent to the pre-de-
fined number, i.e. to the service center
number. The phone has three sending at-
tempts. If there is no service at the moment,
it depends on the
whether the message will be sent later or
not. For further information, please see the
chapter Main menu, Settings, Telematics
settings, Protocol settings, Message storage.
If the phone is turned off, sending status
messages is not possible.
Make sure that
1. The phone is configured as a status
phone.
- For further information, please see
the chapter Main menu, Settings,
Telematics settings, Primary use of
emergency (SOS) button.
BENEGUARD-BUTTON: STATUS MESSAGES
Message storage

CHECK LIST

setting
37