Benefon TRACK PRO 1.1 Owner's Manual page 112

-
5. Press .
SEND
If there is SMS transmission failure, the text
Error in sending will be displayed. In this
case, make sure the receiver´s phone num-
ber (including prefix) and message box
number are correct and also that there is
enough network coverage for radio com-
munication.
S e n d
By selecting Send , you can send the mes-
sage to someone without saving the mes-
sage in your SIM card.
For further information about sending the
message, please see the instructions above,
in the previous chapter Send and save.
S e n d w i t h p o s i t i o n
By selecting Send with position
send a message to the operator with a re-
quest for position information (in this case
the position information is based on the
GSM network parameters, not the GPS co-
106 MEMO: MESSAGES
ordinates). You can save the message with
your own messages as well.
For further information about sending
messages, please see the instructions in the
previous chapter Send and save.
Please note that this function is available
only if your operator supports the appro-
priate positioning services.
By selecting
sage to yourself (as a draft) without sending
it immediately to anyone.
If you wish to finish or send the message lat-
er, you can recall the postponed message
through
In case you have a postponed message,
which you continue and postpone again,
, you can
the newer postponed message replaces the
old one. An empty message cannot be post-
poned.
P o s t p o n e
you can save the mes-
Postpone
Write messages menu.