Sirius XM RAdio Starmate 8 User Manual page 42

Vehicle Installation
11. If you are using the wire guide channel
across the back of the Vehicle Dock to
organize the wires, place the wires in
the guide and then tighten the 4 screws
to securely attach the mount . Then the
installation is complete .
If the signal reception is good, showing at least
one bar in the lower left corner of the display,
but there is no SiriusXM audio, verify that both
Starmate 8 and your vehicle's FM radio are
tuned to the same FM channel (steps 7 & 8) .
Also ensure the chosen FM channel is a suitable one to use in your area (step 5) .
Verify that nothing is plugged into the AUDIO connector on the PowerConnect
Vehicle Dock . Refer to "Troubleshooting" on page 78 for additional help .
42
99.3 FM
Set your vehicle radio to the
above channel to enable audio.