Sirius XM RAdio Starmate 8 User Manual page 36

Vehicle Installation
7. Ensure Starmate 8 is tuned to Sirius
Preview channel 184 . Upon power up,
Starmate 8 should tune to channel 184
by default, when it's not yet activated . If
it's not on channel 184, refer to "Listening
to Satellite Radio" on page 49 to learn
about how to tune a channel .
8. Turn on your vehicle's stereo system . Set
it to play from the auxiliary input source .
You should hear channel 184 through your
vehicle's stereo system . You are now ready
to activate your Starmate 8 .
10. The audio level output of Starmate 8 can
be increased or decreased as necessary
to match the audio levels of other sources
in your vehicle . Refer to "Set Audio Level"
on page 71 .
11. If you are using the wire guide channel
across the back of the Vehicle Dock to
organize the wires, place the wires in the
guide and then tighten the 4 screws to
securely attach the mount . Then the installation is complete .
If the signal reception is good, showing at least one bar in the lower left corner of
the display, but there is no SiriusXM audio, be sure the vehicle's stereo system is
set to the auxiliary input source (step 8) . Also be sure that the audio level is set
high enough to be heard (step 9) . Refer to "Troubleshooting" on page 78 for
additional help .
36
Signal Indicator
SATELLITE
TERRESTRIAL
184 Sirius Preview
To Activate, Call
1-888-539-7474