Sirius XM RAdio Starmate 8 User Manual page 35

Vehicle Installation
Option 1: Aux In Cable Installation Instructions
1. Plug the Cassette Adapter into the green AUDIO connector at the side of the
PowerConnect Vehicle Dock .
2. Plug the other end into the auxiliary input jack of your vehicle's stereo
system .
3. If you are using the vent mounting method, attach
the Vent Mount to the vent .
4. Insert Starmate 8 into the dock, aligning the radio
against the rear of the dock so that the rails on
the dock fit into the mounting slots in the back of
the radio .
5. Power on your Starmate 8 by pressing the Power
button .
6. Be sure the vehicle is outside and the antenna has a clear view of the sky . Verify
that you are receiving the SiriusXM signal . There should at least be one bar on
the lower left corner of the main display screen that denotes antenna signal
strength . You can also press menu and then press
Signal Indicator . Press the Select button . The Satellite and Terrestrial bars
show the strength of the signal being received . If the signal reception is good,
press and hold menu to return to the main display screen .
AUDIO
ANT
1 2 3 4 5 6 7 8
to scroll to and highlight
menu
FM
jump
9 0
direct
35