Chapter 1. - Getting Started - Baofeng UV-2501 User Manual

2 VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Chapter 1. – Getting Started
Qualified technicians shall service this equipment only. Do not modify the radio for any
•
reason.
Use only BTECH supplied or approved accessories.
•
Turn off your radio prior to entering any area with explosive and flammable materials.
•
Do NOT USE your transceiver at a gas/fuel station
For vehicles with an air bag, do not mount your radio in the area over an air bag or in
•
the air bag deployment area.
Do not expose the radio to direct sunlight over a long time, nor place it close to a
•
heating source.
If the unit emits smoke or an odor, you should immediately cut off the power supply.
•
Then send the radio to the nearest service center or dealer
Do not operate the mobile transceiver on high power unless it is necessary. Do not
•
transmit for long periods of time, as it may overheat the transceiver.
Keep the unit away from dusty, damp and wet environments
•
Use the correct power supply (~13.8V); do not use incorrect or higher voltage (e.g. 24V)
•
BEFORE PROCEEDING INSURE:
UV-2501 / UV-5001