Baofeng UV-2501 User Manual page 30

24 VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
18 PRI-CH Priority Channel
19 SC-REV Scan Resume Method
20
OPTSIG Optional Signaling
21 SPMUTE Speaker Mute Settings
22 PTT-ID PTT ID - When to send
23 PTT-LT PTT ID - Transmit Delay
000 > 199 Channel selected for Priority Scan
(Time Operation) Scan stops when signal detected.
TO
Scan resumes after a predetermined time.
(Carrier Operation) Scan stops when signal
CO
detected. Scan resumes when signal disappears.
(Search Operation) Scan stops when signal
SE
detected. Scanning will not resume.
OFF No optional signaling
DTMF DTMF signaling selected
2TONE 2TONE signaling selected
5TONE 5TONE signaling selected
Squelch opens when any non-OptSig activity is
QT
present.
Squelch opens when CTCSS/DCS tone is recognized
AND
along with the optional signaling.
Squelch opens when either the CTCSS/DCS tone OR
OR
the optional signaling is recognized.
OFF Do not send
BOT Send at Beginning of Transmission
EOT Send at the End of Transmission
BOTH Send at both Beginning and End
0 > 30 Set Delay Time
UV-2501 / UV-5001