Remote Kill; Turn On Function; Alarm Function - Baofeng UV-2501 User Manual

18 VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
transmit function, only the receiver (LCD will display remote stun information). Only after
receiving the ON code will the transmit function return. This function's settings are controlled by
the master ID, and not the receiving station. (remote stun code is set by PC software)
When receive DTMF signal Is same as pre-set remote kill code, receiver will turn off all functions,
and LCD will display remote kill information. Only after receiving the ON code will the radio's
function return. This function's settings are controlled by the master ID, and not the receiving
station. (remote kill code is set by PC software)
When receive DTMF signal matches the pre-set turn on code, the remote stun or remote kill will
be cancelled. This function's settings are controlled by the master ID, and not the receiving
station. (remote kill code is set by PC software)
When receive DTMF signal matched the pre-set alarm code, the receiver's alarm function will be
turned on. Alarm mode and alarm channel are set by PC software. This function is controlled by
the master ID and not the receiving station. (Alarm code is set by PC software). Signal control by
Remote Kill
Turn on function
Alarm function
UV-2501 / UV-5001