Baofeng UV-2501 User Manual page 33

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
41 ANI-L ANI Length
42 REP-S Repeater Activation Tone
Repeater Forwarding
43 REP-M
Mode
44 TDR-AB TDR Return Time Delay
Squelch Tail Elimination
45 STE Requires both radios have
function ON.
Repeater Squelch Tail
Elimination
46 RP-STE
Requires a repeater using
this function.
Repeater squelch tail
47 RPT-DL
delay.
Initialize to Factory
48 RESET
Defaults
3, 4, 5 Length of ANI ID code
1000Hz 1450Hz
Audible tone for repeater activation
1750Hz 2100Hz
OFF Function OFF
CARRI Forward after receiving Carrier
CTDCS Forward after receiving correct CTDCS
Forward after receiving correct mono audio (Menu
TONE
42)
DTMF Forward after receiving assigned DTMF code. (ANI)
OFF Function OFF
This is the delay time before returning to the
1 > 50 seconds
primary channel after secondary signal is clear.
OFF Function OFF
ON Eliminates squelch tail at end of transmission.
OFF Function OFF
1 > 10 Delay Time
OFF Function OFF
1 > 10 Delay Time
VFO Menu Initialization
ALL Menu and Channel Initialization
27