Baofeng UV-2501 User Manual page 15

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
group signal code/decode memory. Only set by PC software.
25. [F Key] + [2] + [5] : EMC-TP - alarm mode setting. ALARM: turn on the alarm sound. ANI:
send alarm code and ID code. BOTH: both above.
26. [F Key] + [2] + [6] : EMC-CH - alarm channel setting. CH will appear in front of the
designated channel.
27. [F Key] + [2] + [7] : RING-T - Ring time setting. OFF: close function. Choose 1-10 seconds
to set ring time when radio Signal Code is received.
28. [F Key] + [2] + [8] : CHNAME - channel name edit.
29. [F Key] + [2] + [9] : CA-MDF - Display Mode (upper) - FREQ: displays Frequency. CH:
displays channel number. NAME: displays assigned channel name.
30. [F Key] + [3] + [0] : CB-MDF - Display Mode (lower) - FREQ: displays Frequency. CH:
displays channel number. NAME: displays assigned channel name.
31. [F Key] + [3] + [1] : SYNC – When ON, upper and lower display are synced to the same
channel.
32. [F Key] + [3] + [2] : PONMSG - PowerOn message. Display mode setting. FULL: Full
display when turn on the radio. MSG: displays assigned PowerOn message. BATT-V
displays battery voltage at PowerOn.
33. [F Key] + [3] + [3] : WT-LED - standby backlight setting. OFF: no backlight. Color options
are BLUE, ORANGE and PURPLE.
34. [F Key] + [3] + [4] : RX-LED - receive backlight setting. OFF: no backlight. Color options
9