Baofeng UV-2501 User Manual page 16

10 VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
are BLUE, ORANGE and PURPLE.
35. [F Key] + [3] + [5] : TX-LED - transmit backlight setting. OFF: no backlight. Color options
are BLUE, ORANGE and PURPLE.
36. [F Key] + [3] + [6] : MEM-CH - saves the selected channel.
37. [F Key} + [3] + [7] : DEL-CH - deletes the channel selected.
38. [F Key] + [3] + [8] : SFT-D - Frequency difference direction setting. OFF: no frequency
difference. (+): Transmit offset amount will higher than the receive frequency. (
Transmit offset amount will lower than the receive frequency.
39. [F Key] + [3] + [9] : OFFSET - difference between the transmit and receive frequency.
(00.000 - 69.990 MHz)
40. [F Key] + [4] + [0] : ANI - radio ID code. Code only can set by PC software.
41. [F Key] + [4] + [1] : ANI-L - ID code length. Length = 3, 4, 5.
42. [F Key] + [4] + [2] : REP-S - repeater activate setting. Pressing CALL will send a
predetermined tone. Options are 1000 Hz, 1450 Hz, 1750 Hz, 2100 Hz.
43. [F Key] + [4] + [3] : REP-M - repeater forwarding mode setting. OFF: close function.
CARRI: forwarding after receive carrier. CTDCS: forwarding after receive correct
CTDCS. TONE: forwarding after receive correct mono audio. DTMF: forwarding
after receive assigned DTMF code.
44. [F Key] + [4] + [4] : TDR-AB - TDR return time. Delay time before returning to the
primary channel after secondary signal is clear.
UV-2501 / UV-5001
-)
: