Download Print this page

Hotpoint Countersaver RVM60 Use And Care Manual page 13

Hide thumbs Also See for Countersaver RVM60:

Advertisement

The NllN/SEC TIMER has three
timingfunctions:
* It operatesas a minute timer.
It can be set to
delay
cooking.
~ It can be usedas a hold setting
afterdefrosting.
The MIN/SEC TIMER operates
without microwave energy.
l-lcwv
to
~iime a S-hllinute
Phone call
1. Touch MIN/SEC TIMER pad. The
display shows :0 and ENTER TIME
flashes.
2. Touch number pads 3, 0 and O
(for 3 minutes and no seconds).
Display shows 3:00.
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals
and display shows time of day.
Programming a HOLD Time
The Minute/Second Timer can also
be used to program "hold time"
*
between microwave cooking func-
tions The time can range from one
.
second to 99 minutes and 99
e
econds. A HOLD, or "standing"
time may be found in some of your
own recipes or Cookbook.
To set the oven to delay cooking up
to 99 minutes follow Steps 1 and 2
to enter hold time. Then touch
TIME COOK pad and enter time .
before pressing START.
How to Defrost, Hold
and
Time cook
Let's say you want to defrost a
frozen casserole for 15 minutes,
hold for 10 minutes and then Time
Cook for 25 minutes. Here's how
to do it:
Step 1:Take casserole from freezer
and place it in the oven.
Step 2: Touch DEFROST pad.
The display shows:0 and ENTER
DEF. TIME flashes.
Step 3: Touch pads 1,5,0 and Ofor
15 minutes defrosting time. 15:00
appears on display. (Defrosting is
automatically set on Power Level
3 but can be changed by touching
POWER LEVEL pad and the new
Power Level.)
Step 4: Set standing or hold time by
touching
MIN/SEC TIMER. :0
~•ÿÿø
appears on display and ENTER
TIME flashes.
Step 5: Touch 1,0, 0 and Oto hold
for ten minutes. 10:00appears on
display.
Step 6: Touch TIME COOK pad.
The display shows:0 and ENTER
COOK TIME flashes.
Step 7: Touch 2, 5, 0 and Ofor
twenty-five minutes of cooking
time. 25:00 appears on display.
Step8: Touch START. 15:00count-
ing down shows on display. As each
function is automatically performed
oven display shows instructions
entered and the function. While
cooking, you may touch appro-
priate pad to recall times you set.
Step 9: When time is up, the oven
sounds, oven light and fan shut off.
The display will show "End".
Step 10:Open the door or touch
CLEAR/OFF pad.
Questionsand Answers
Q. What will happen if ! accidentally
reversemy defrost,hold and cook
instructions?
A. The oven automatically rear-
ranges your program. Defrosting
always comes first, then hold, and
then the cooking function.
Q. Can I defrostand hold only?
A. Yes. Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in Defrost and amount of
time. Then program Hold and the
amount of time. Be sure to put the
thawed dish in the refrigerator
promptly.
NOTE: Let foods remain at room
temperature only as long as safe.
Times will vary.
Q. 1programmedmy oven for a
specificdefrostingtime but it
defrostedlongerthan necessary.
What happened?
A. When instructions conflict, the
oven carries out the last instruction.
You may have set the oven to
defrost for 4 minutes, hold for
2 minutes, and then defrost for
6 minutes. In this case, the oven
would defrost for 6 minutes and
hold for 2 minutes and ignore your
first defrost instruction.
-# —-
— —
—–
—,
-—
—.
— —
— —
—–
—–
— —
— —–
-
—-
-
— —
— —
—.
—–
—–
— ~–
-–
-
- —
—–
-–
— —
—–
13

Advertisement

loading