Table of Contents
Advertisement
4.0
DIAGNOSTICS
4.1
Setup & Diagnostics
The DishDrawer comes with comprehensive fault codes and built in diagnostics, to
save the user & service person time and worry, if the dishwasher ever exhibits a fault.
4.2
Fault Modes
The faults are displayed in the LCD as one of 8 F (fatal) faults or one of 3 U (user)
faults. A Fatal fault will usually require the assistance of a qualified service person,
while many User a faults are simply blockages or installation errors, easily fixed by the
user. In the Integrated models, an LCD is not available, and faults are indicated by a
Red center LED, with the fault number indicated on the touch switch panel with Red
LED' s. The indication below for the Touch Switch Panel is from left to right, with ' _'
meaning the LED is Off, and ' #' meaning the LED is On. A fatal fault is accompanied
by a continuous pulsating beep, while a user fault is accompanied by a more pleasant
continuous pulsating tone pattern. The last two faults are logged into EE memory,
with 8 bytes of information logged to aid location of the fault. These bytes are
available for interrogation by a PC if required. The fault codes shown on Pages 20/21
have been implemented in the DishDrawer.
To clear any fault press the Power button. It the fault is still present then it cannot be
cleared.
- 12 -
Hide quick links:
Advertisement
Table of Contents
