Inner
Tub Cap
4) Disassembly of Tub Cover and Pulsator
① Remove 8 screws and take off the tub cover.
② Remove the pulsator cap.
③ Remove the pulsator screws.
④ Remove the pulsator washer.
5) Assemble the service tool (38 mm wrench)
6) Remove the hub attachment nut. (38 mm)
① Hit the bar using the hammer.
Tub Cover
Pulsator Cap
Pulsator
Screw
Pulsator
② Disconnect hub nut and disassemble the inner tub.
23
Inner Tub Cap
Shaft
Rotor Nut
Stator
Hub Attachment Nut
Hub Fixing Nut
Outer Tub
Inner Tub
Bearing Housing ASM
Rotor