ULTRAFRYER F-P20-18 Operation Instructions Manual page 33

d) Reassemble the "Micro-Mesh stainless steel filter according to DAILY steps 1 c 4) a) (6) .
2) "Magnepad" Envelope Filter – Disassemble, clean, and re-assemble the "Magnepad" Filter Assembly according to
DAILY cleaning steps 1 d 2) .
c. Place the CRUMB CATCHER PAN and SLUDGE CATCHER SCREEN in the fryer with the Boil-Out Solution for cleaning,
and after they are cleaned, ENSURE they are sprayed with a solution of vinegar/water as described in WEEKLY above.
d. THROUGHLY clean the Filter Tub, Cover and Sludge Catcher Pan with HOT SANITIZER SOLUTION and allow them to
air dry.
e. Re-assemble and install the Filter Tub according to the FILTER TUB ASSEMBLY AND INSTALLATION section of this
manual.
Page 29 of 56
30A168