Table of Contents
Advertisement
TH112_QG(e).fm Page 6 Monday, June 5, 2006 3:25 PM
Registering a cellular phone (Base unit)
1
Base unit:
Press and hold the desired CELLULAR SELECT button ({1} to {5}) until a short beep
sounds.
L "CellPhone Registering" is displayed and the CELLULAR SELECT button
starts flashing yellow-green.
2
Your cellular phone:
Follow the instructions of your cellular phone to enter the registration mode.
L Depending on your cellular phone, it may ask you to enter the base unit PIN (Default:
"7262").
L When registration is completed successfully, the unit beeps and the button stops
flashing but remains lit in yellow-green.
Frequently asked questions
Question
How can I increase
handset volume level?
Why is the conversation
noisy or cutting off?
Can I add another
accessory handset to my
base unit?
Can I keep battery
charging all the time?
How can I answer a call-
waiting call (2nd call)?
For further troubleshooting information, visit http://www.panasonic.com/phonehelp or
refer to Operating Instructions.
Cause/solution
L Push the joystick {^} repeatedly while talking.
L Try to relocate the base unit so that distance from location
to use the handset will be minimized.
L Send your unit to service, if your unit has same problem
when the handset is next to the base unit.
L Yes, you can add up to 7 additional accessory handsets.
L To purchase accessory handsets (KX-THA19),
please visit http://www.panasonic.com
or call 1-800-332-5368. TTY users (hearing or speech
impaired users) can call 1-866-605-1277.
L You can leave handset on the base unit or charger
anytime. There is no damage to the battery.
L Press {CALL WAIT} when you hear call-waiting tone.
–
–
6
Advertisement
Table of Contents
