Frequently Asked Questions - Panasonic KX-TG8220FX Quick Manual

All manuals and user guides at all-guides.com
TG8200_8220FX(e-e)_QG.fm Page 6 Monday, July 9, 2007 7:18 PM

Frequently asked questions

Question Cause & solution
Why is w flashing? L The handset is too far from the base unit. Move
L The base unit AC adaptor is not connected.
L You are using the handset or base unit in an area
L The handset is not registered to the base unit.
Why can I not make calls? L The dialling mode setting is incorrect. Set to
Why is the handset display L The handset is in screen saver mode. Press
blank?
What should I do when the L Make sure that the batteries are installed
handset does not turn on?
L Fully charge the batteries.
L Clean the charge contacts and charge again.
How long is the battery L When you are using fully-charged Ni-MH batteries
operating time?
L It is normal for batteries not to reach full capacity
L Actual battery performance depends on a
closer.
Check the connections.
with high electrical interference. Place the
handset and base unit away from interference
sources, such as antennas and mobile phones.
Register it (page 8).
"Tone" or "Pulse" as needed.
{ih} to activate the handset display again.
correctly.
(supplied batteries);
In continuous use: 12 hours max.
In continuous standby mode: 150 hours max.
at the initial charge. Maximum battery
performance is reached after a few complete
cycles of charge/discharge (use).
combination of how often the handset is in use
and how often it is not in use (standby).
– 6 –