Table of Contents
Advertisement
TH112_QG(e).fm Page 5 Monday, June 5, 2006 3:25 PM
Basic operation (Base unit)
Feature
Adjusting the speaker volume
Viewing the caller list and
calling back
Ringer volume
Answering call-waiting call
(2nd call)
Answering system (Base unit)
Feature
Auto answer on/off
Recording your greeting
message
(max. 2 minutes)
Listening to new messages
Listening to old messages
Erasing a message
Using the answering
system remotely
For further information, visit http://www.panasonic.com/phonehelp or refer to
Operating Instructions.
Operation
Press {^} or {V} repeatedly while talking.
1
{MENU} i G i {SET}
2
Press {V} to search from the most recent call, or {^} to
search from the oldest call.
3
{SP-PHONE}
1
{MENU} i {#}{1}{6}{0}
2
Select the desired line.
3
Select the desired volume. i {SET} i {STOP}
Press {CALL WAIT} when you hear call waiting tone.
Operation
1
Press {LINE SELECT} repeatedly to select the desired
line(s).
2
{ANSWER ON}
1
{MENU} i A i {SET}
2
"Greeting record" i {SET}
3
Select the desired line. i {SET}
4
After the unit beeps, speak clearly about 20 cm (8
inches) away from the MIC (max. 2 minutes).
5
To stop recording, press {STOP}.
6
Press {STOP} when finished.
When the {MESSAGE} button flashes on the base unit,
press {MESSAGE}.
When the {MESSAGE} button does not flash on the base
unit, press {MESSAGE}.
Press {ERASE} during playback.
1
Dial your phone number from a touch tone phone.
2
After the greeting message starts, enter your remote
code. (Default remote code is "11".)
L The unit plays back new messages including memo
messages.
L After playing back new messages, the voice guidance starts.
3
Follow the voice guidance as necessary.
–
–
5
Advertisement
Table of Contents
