Table of Contents
Advertisement
TH112_QG(e).fm Page 7 Monday, June 5, 2006 3:25 PM
Quick troubleshooting
1 Handset shows:
"No link to base. Move closer to base and try again."
Place the handset on the base unit,
then check if the charge indicator is on.
The charge indicator is OFF.
Unplug and then plug AC
adaptor properly to both
the base unit and AC
outlet.
The charge indicator
is still OFF.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor
and insert the battery into the handset again. Try re-
registration as explained later in this guide.
Your telephone may need service. For further troubleshooting,
please visit http://www.panasonic.com/phonehelp
The charge indicator
is ON.
The charge
indicator is ON,
now.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
Re-registration
failed.
Re-registration
failed.
–
–
7
Advertisement
Table of Contents
