Fetco CBS-2131XTS User Manual page 8

Programming
GENERAL
Tank Temp.
"OFF" allows
Brew at Temp.
brewing at any
temperature.
• Temperature
Units of Meas.
• Volume
ECO Mode
Logo Timeout
Brew B. Sensor
Use Flowjet
Normal for most water
LLC Sensitivity
"HIGH" for R.O.
BREW AT TEMPERATURE DEFINITONS
BREW AT TEMP: "ON"
(DEFAULT: FACTORY PROGRAMMED INTO BREWER)
"BREW START" Batch Section Buttons will not be accessible until
tank temperature is at set point.
The "BREW START" screens with the Batch Section Buttons
become accessible when hot water tank is at the selected
temperature. The screen at right displays when the "BREW AT
TEMP" is selected.
BREW AT TEMP: AUTO
This allows the "BREW START" to activate if the hot water tank is
at the selected temperature—then brew will start.
If the temperature is too low, the brewer will wait until the proper
temperature is reached. A screen (example to the right) will
display showing a thermometer icon and the tank temperature.
IMPORTANT: ALWAYS have dispenser(s) under the brew
baskets when in the BREW AT TEMP mode.
BREW AT TEMP: OFF
Allows brewing at any temperature above 179°F/82°C. (Not recommended)
Programming
INPUTS
• Input Summery
Display Inputs
Cal. Touch Screen
Factory set
Items Default
200°F
"ON"
°C or °F
Gallons [Liters]
Energy Saving
OFF
Mode
0:30 mm:ss
NORMAL
NO
NORMAL
USER SELECTABLE
USER SELECTABLE
Factory set
Items Default
Calibrate
Programming Range
(display)
200 °F
|______________[]___|
170
ON
|________[]_______|
OFF ON AUTO
°F
|___[]____________|
°F °C
Gallons
|___[]____________|
Gallons Liters
ECO Mode
_______________[]_____
ON OFF
0:30 mm:ss
|__[]___________|
0:15
NORMAL
|__[]____________|
NORMAL OVERRIDE
NO
____[]_______________
NO YES
NORMAL
____[]______________
NORMAL
[ft]
XTS
0
™
EXTRACTOR
500
TOUCHSCREEN
CBS_2132 3L 1000
Ready Tank Temp °F
197 2000
Heating
2500
Filling
XTS
3000
3500
Regular 1
1.50
INFO
4000
05:30
Regular 2
4500
1.50
05:30
5000
Decaf 1
92° 1.50
5500
05:30
C
Decaf 2
6000
STOP
1.00
05:30
6500
7000
7500
8000
8500
Programming Range
(display)
R. Brew Basket Sens. [ single/dual]
L. Brew Basket Sens.
H. Liquid Level probe
H. Tank Temperature Probe
L. Tank Temperature Probe
SD Card Recognized
Tank Temp. 200
Calibrate
________________[]____
YES
8
Notes
Correction for high
altitude below
207
SEE NOTE BELOW!
[Switchable Units]
[Switchable Units]
If Selected: Lowers hot
water tank temperature to
170°F after 1 hour of
inactivity
5:00
Factory or service use for
servicing. "NORMAL" is
recommended for safety.
Trims water handling
system for Flowjet
Sets sensitivity for liquid
level control.
High is for reverse osmosis
water or other very pure
HIGH
water.
Chart to correct for altitude for boiling point
in tank water temperature.
Suggested Boiling Suggested
[m]
Setting[°F] point[°F] Setting[°C]
0 200 212.0
152 200 211.0
305 200 210.1
610 200 208.1
762 200 207.2
914 200 206.2
1067 197 205.3
1219 195 204.3
1372 194 203.4
1524 194 202.4
1676 193 201.5
1829 192 200.6
1981 191 199.6
2134 190 198.7
2286 188 197.8
2438 187 196.9
2591 185 196.0
Notes
If Yes:
Follow directions on the
touch screen
NO
Boiling
point [°C]
93 100.0
93 99.5
93 98.9
93 97.8
93 97.3
93 96.8
92 96.3
91 95.7
90 95.2
90 94.7
89 94.2
89 93.6
88 93.1
87 92.6
86 92.1
86 91.6
85 91.1